Skip to content
Back to Blog

How Do You Allocate Exhibitor Staff Passes by Stand Size?

HB
Henrique B. 18 November 2026 · 7 min read
How Do You Allocate Exhibitor Staff Passes by Stand Size?

Publish one rule in the exhibitor manual (so many staff passes per unit of stand space), give exhibitors a private registration link, ask for the stand number on the form, and check each company's total against the rule from the attendee export. Large trade shows put this inside an exhibitor portal. The rule and the deadline matter more than the portal does.

How Many Staff Passes Should Each Stand Get?

Four or five per 9 sqm is where published rules cluster, usually with a paid route for extras. Three exhibitions that print their rule in public show the range, each taken from the show's own exhibitor pages as read on 18 November 2026.

  • AAOS 2027: the orthopaedic surgeons' annual meeting gives five badges per 100 square feet of booth space and states that no extra badges are available.

  • Global Pet Expo 2027: four booth staff badges per 100 square feet, each registered on an approved company email domain. Further staff badges are sold at USD 2,500 each, which is less a price than a polite way of saying no.

  • AAPEX 2026: a banded table that starts at four badges for a 100 to 150 square foot booth and reaches 30 at 1,200 square feet, plus one for every further 100. Badges over the allotment cost USD 50, then USD 75, then USD 100 as the show gets closer.

A hundred square feet is about 9.3 sqm, so the American 10 by 10 booth and the 3 by 3 metre shell scheme stand that fills UK halls are near enough the same thing. If you have never set a rule, four passes for the first 9 sqm and a sliding band above it is a defensible place to start.

Why Limit Exhibitor Staff Passes at All?

Because an exhibitor pass opens the hall before the visitors arrive, and it is usually free. Leave it uncapped and it becomes the way round every other rule you have.

The AAPEX document is blunt about it: badges are for booth personnel only, they may not go to customers or guests, and everybody working on the stand needs one, models, interpreters and legal counsel included. Global Pet Expo takes a different road to the same place: a staff badge has to sit on the exhibitor's own email domain, and anybody registered on a different domain uses up one of a separate guest allowance.

There are quieter reasons too. Your venue's capacity counts stand staff. Your caterer counts them if exhibitors get lunch. And your visitor numbers are only worth quoting to next year's exhibitors if the people in exhibitor passes really were exhibitors.

What Does an Exhibitor Portal Do, and Do You Need One?

A portal lets each exhibitor log in, see its allowance and enter its own staff, so the organiser stops being the person who types names. The table compares what five routes say about themselves. Each row rests on one page, read on 18 November 2026, and where a page was silent the cell says so.

RouteWho Enters the Staff NamesAllocation by Stand Held in the SystemChanges to Names
Map Your Show, as used by AAOS 2027 and Global Pet Expo 2027The exhibitor, in the show's exhibitor portalYes, by booth size under each show's ruleFree changes in the portal at AAOS
Maritz registration, as used by AAPEX 2026The exhibitor's primary contact, through an emailed link and loginYes, in bands by booth sizeOnline until badge mailing begins, then at the onsite desk
Swapcard exhibitor portalThe exhibitor, who can add, remove or replace team members up to event dayThe page lists booth allotments tied to the packageBy the exhibitor in the portal
Cvent Exhibitor ManagementSelf-serve registration for booth staff in the Exhibitor PortalNot stated on the page readNot stated on the page read
eventcloudThe exhibitor through a private link, or the organiser by Excel or CSV importAsk usEach staff member edits their own answers in the attendee portal

The sources are the Swapcard exhibitor portal page, the Cvent exhibitor management page and the three show pages linked above. None of the vendor pages carries a date.

Do you need one? At 800 stands, yes, and you already know it. At 60 stands, the work is a rule, a link and a weekly look at a spreadsheet. Coming soon: an exhibitor and sponsor portal. Need one for your show? Tell us how your allocations work.

How Do You Run Allocations with a Private Link?

You give exhibitor staff their own ticket group, hidden from the public page, and let the form do the bookkeeping. In eventcloud that looks like this.

  1. Create a private ticket group for exhibitor staff. It is reachable only by a secret link, so visitors never see it, and it has its own registration form.

  2. Ask for the stand number and the exhibiting company on that form, as a text question or a dropdown. Those two answers are what you will count by later.

  3. Set a capacity on the staff ticket type equal to the sum of every stand's allowance. The pool as a whole cannot overrun, whatever any single exhibitor does.

  4. Send each primary contact the link and their number. One person can book the whole team in a single order, up to 99 of a ticket type per order line. Each staff member is named with their own email address, gets their own confirmation and ticket, and the person who booked gets an order confirmation listing who each ticket went to.

  5. Or take a spreadsheet. Some exhibitors will always send a list. Attendee import from Excel or CSV creates real orders and tickets on a published event, checks every row before anything is written, and sends emails only if you choose.

  6. Check the totals weekly. Export attendees to Excel with every answer, count by stand number, and compare against the allowance column in your stand list. It takes ten minutes, and it finds the stand that has registered its whole sales department.

Extras work the same way. Add a paid ticket type for additional stand staff inside the private group and give it stacked price windows that switch themselves, which is the AAPEX rising price without anybody remembering to change it at midnight. Promo codes can be restricted to named email domains, which helps when a reduced rate should reach an exhibitor's own staff and nobody else.

Registration, Sorted

A Form for Every Audience. Answers on Every Badge.

Delegates, speakers and exhibitors each get their own registration form, and every answer flows to badges, emails and the Excel export.

See Event Registration

Because badge designs pull live data from any registration question, the stand number and company you asked for print on the badge. And the pass can carry more than a way through the door. Lead retrieval comes with every seat: exhibitors scan attendees with their own phones, rate and qualify each lead, and export their leads to Excel. No charge from us per scanner or per lead. You decide whether exhibitors get it with their pass or buy it at checkout for a price you set. What staff scan is the QR code on each attendee's badge or in their event app. A scan is not consent, so tell visitors at registration what a scan shares.

When Should the Deadline Fall, and What Happens on Build Day?

Set the deadline by how badges reach people. A show that posts badges needs names weeks ahead: AAPEX allowed online changes only until mailing began, and after 25 September sent exhibitors to an express desk with a barcoded confirmation. AAOS offers three routes, including onsite collection by one designated contact and express pickup by each person scanning a barcode from their email.

If you print on arrival, the deadline can sit much closer to the show, and its real job becomes giving you a final number. With a self-service Badge Kiosk by the exhibitor entrance, staff type the nine-digit ticket number from their confirmation, check the badge on screen and print it, and printing checks them in.

Write down the onsite rules as well. AAPEX reprints a lost badge once for USD 100 and asks for photo ID and proof of employment before issuing an extra badge onsite. You may not want to be that strict, but decide before 7 am on build day, not during it.

Who Else Is Standing on the Stand?

This is the part most allocation rules forget. A stand at an exhibition is staffed by the exhibitor's employees, and also by agency hosts, interpreters, a stand builder who needs to come back on day two, and sometimes a second company sharing the space. If your only pass type is "exhibitor staff", all of them end up in it, and the count you report afterwards means less.

Give them their own private ticket groups with their own forms. A contractor pass can ask for the stand they are working on and the company that hired them. A stand sharer can be registered under their own company name while still quoting the host's stand number. It is the same idea that runs through separate visitor, exhibitor and press flows in one trade show: one event, a form per audience, and a list you can filter afterwards. The UK's Farm Business Innovation show at the NEC handles its own version with a compulsory staff pass registration task in its exhibitor zone, which is at least a reminder that somebody has to be told to do it.

For the full exhibition picture, from visitor registration to lead retrieval, the trade shows and exhibitions page sets out how the pieces connect.

Your next step needs no software. Open last year's exhibitor list, add a column for stand area, and work out what four passes per 9 sqm would have given each company. If the total alarms the caterer, you have your answer on whether extras should be paid.

Share This Article Twitter LinkedIn
Registration, Badges, Check-in

Run Your Next Event with No Meter Running.

Unlimited events, registrations and attendees on every plan, with badges, a self-service kiosk, check-in and lead retrieval on every seat.

Get in Touch. Let's Talk Events.